Erwin XL
Ultralight Electro
- building Instruction
August 2018
www.pcm.at
13
To connect the servos to the levers use two
connectors
M2,5mm
. In between, use a
welding rod
(diameter 2mm),
which you solder inside the both connectors.
To find the right length of the welding rod put all servos in
0-position
. If the length isn’t exact after soldering, you can
heat the soldered point
with the soldering iron until the
the wire can be moved to the correct position.
The root ribs have
recesses for the plugs
between
fuselage and wings for easy electrical connection.
Fix the covers of the servos with a double-sided adhesive.
In order to
move the triangular ends
of the ailerons,
connect the two control surfaces with an adhesive tape.
