Erwin XL
Ultralight Electro
- building Instruction
August 2018
www.pcm.at
12
8. Wing
The openings for the servos are big enough for all
appropriate standard servos including mounting frame,
such as Futaba S3150.
The connection to the levers on the rudder goes
crosswise
through the wing
.
Lead the cable
through the wing as shown below.
The holes in the servo boxes for cables a.s.o. must still be
thrilled.
Before you glue the levers into flaps and ailerons,
grind
the gluing spots
on the control surfaces and on the
levers.
Aileron
Flap
For gluing the lever use
epoxy-glue with cotton flocks
.
When fitting the lever in the correct position, notice that the
hole in the lever should be situated
vertically above the
hinge line
.
