© PCE Instruments
51
7
Data logger
With the help of the data logger function, measured values can be logged over a defined period
of time. A total of 50 memory locations is available for the saved data records. The PC softw are
must be used to display the data records.
7.1
Settings
The same settings are used for the measurement parameters as for the regular measurement
mode. These can be set in the
Measurement
menu. The settings specific to data logger mode
are in the
Data logger
menu.
Fig. 31 Data logger
The storage interval can be set betw een 1 s ... 12 h. This means that only the measured values
w ithin the set interval are saved. The measured value display during logging updates at the same
rate as in regular measuring mode.
The data logger can be started in tw o different w ays: either manually via the
OK
key or a start
time can be set via the
Start condition
menu.
There are three different options for stopping the data logger. These can be selected via the
Stop
condition
menu. It can be stopped manually by pressing the
OK
key, at a specific time or after
a configurable time interval.
The start and stop conditions can be combined in any w ay.
When selecting date/time as the start or stop condition, the start of the data logger is prevented
if the set start/stop time is before the current time or if the stop time is before the start time. In this
case, the corresponding settings must be checked and corrected.
After the desired data logger settings have been selected, the data logger can be started.
E
n
g
li
s
h
Summary of Contents for PCE-VT 3800
Page 2: ...PCE Instruments...
Page 6: ......
