© PCE Instruments
49
6.3
Making a m easurement
To make a measurement, the sensor must be attached to the desired measuring spot using a
stud bolt or the magnetic adaptor. When measuring w ith the optionally available measuring tip,
ensure correct alignment.
In measuring mode, the measurement is carried out continuously and the current value is
displayed on the screen.
If ISO evaluation is activated, the measured value is automatically assigned to the corresponding
zone on the basis of the selected grouping and highlighted in colour so that a quick assessment
of the vibration severity is possible. In addition, the corresponding zone flashes periodically.
6.4
Memory
By pressing the
OK
key while the measurement screen is opened, the current measured value
can be saved. This is confirmed by a corresponding message at the bottom of the screen. A folder
number and the measured value index are displayed. The measured value is displayed in the
currently selected folder w hich can be selected via the menu. A total of 99 folders w ith 50 readings
each is available.
If the maximum number of measurements is already saved in a folder, a message is displayed
w hen an attempt is made to save another measurement. In this case, a different folder can be
selected or saved measurements can be deleted.
The saved measurements can be view ed again via the menu item
Memory > Display data
.
Fig. 30 Manual memory
The desired folder must be set beforehand via the corresponding menu. The measurements can
also be read out w ith the PC softw are.
Saved measurements can be deleted either individually, completely for the current folder or
completely for all folders via the corresponding menu items.
E
n
g
lis
h
Summary of Contents for PCE-VT 3800
Page 2: ...PCE Instruments...
Page 6: ......
