© PCE Instruments
46
Fig. 11 Calibration screen
ATTENTION:
Verify that the required reference vibration is generated by the vibration calibrator before the
calibration is performed!
If the current measurement value compared to the reference vibration exceeds the desired
tolerance, a calibration can be carried out by pressing the
OK
key and confirming the
subsequent dialogue.
Fig. 12 Confirmation dialogue
The calibration is performed automatically and should take only a few seconds. After a successful
calibration, the hint
“Calibration successful” pops up. The device then returns to the measurement
screen.
5.8
Settings
5.8.1
Units
In the sub menu
Units,
you can choose either the International System of Units (SI) or the Anglo-
American unit system (US).
5.8.2
Decim al separator
As decimal separator for the readings, you can either select a dot or a comma.
5.8.3
Date & tim e
This menu is used to change the date and time. The date format can also be changed.
E
n
g
li
s
h
Summary of Contents for PCE-VT 3800
Page 2: ...PCE Instruments...
Page 6: ......
