MAX MIN button
(UT61A, UT61B, UT61C and UT61D only)
l
Press
MAX MIN
to start recording of maximum and minimum values. Steps
the display through high (MAX) and low (MIN) readings. The Meter enters
manual ranging mode after pressing
MAX MIN
button.
l
Press and hold
MAX MIN
for over 2 seconds to exit MAX MIN mode and return
to the present measurement range.
PEAK Hold
(UT61E only)
l
Under voltage and current measurement mode, press
PEAK
button to enter
manual ranging mode and start recording of Pmax and Pmin values. The LCD
displays MANU/Pmax.
l
Press
PEAK
again to display MANU/Pmin.
l
Press
PEAK
to step the display through Peak Max and Peak Min readings.
l
Press and hold
PEAK
for over 2 seconds to exit Peak mode, the LCD displays
the
present measurement values.
l
Don't press the "
PEAK
" Key.If the meter have entered "
CAL
" mode.
15
For UT61E,Auto entering Data outputting mode.
