Manual
9
7
Configuration settings
Turn on the viscometer by pressing the main switch. The following notifications are displayed on the
screen for 2 seconds.
Press
“Start” and “Enter” one after the other during these 2 seconds. The following appears on the
display:
With the “
Up
” or “
Down
” keys, select the preferred language (German, Japanese, Spanish, Polish,
French, English, Italian or Portuguese).
Press “
Enter
” to confirm your language of choice.
The following notification then appears:
With the “
Up
” or “
Down
” keys, either select the unit for the viscosity SI (mPa s) or CGS (cP). Press
“
Enter
” to confirm your entry.
The following notification then appears:
With the “
Up
” or “
Down
” keys, either select the unit for the shear stress (S.S.), SI (N/m²) or CGS
(Dyne/cm²).
Press “
Enter
” to confirm your entry.
The following notification then appears:
With the “
Up
” or “
Down
” keys, either select the unit for the temperature, Celsius or Fahrenheit. Press
“
Enter
” to confirm your entry.
The following notification then appears:
