4.0 operation
4.01 Switch on / off
Remove all objects from the platform and switch the scale on or off using the switch on the lower
right side.
4.02 zeroing
Zero range: ± 2% of the max. Weighing range.
If the display of the scale does not jump to "0" without loading the weighing platform, please press the
"ZERO" button.
4.03 Tare function
Place the weight to be tared on the weighing platform and press the tare key to tare this weight. The
tare function is now activated. Now take the weight down, the display now shows the weight as a
negative value. Press the tare key again to exit this function.
4.04 piece counting
If the weight of a piece is known, you can enter it directly using the number keys
and confirm the entry by pressing the key. If the weight is not known, this can also be entered using the
objects. Enter the number of objects using the number key, the number entered is shown in the Unit
Weight display. Now press
the
Button, now the weight and the number are shown in the display.
4.05 alarm
The user has the option of specifying a number of pieces. If this number is exceeded, an alarm signal
sounds. To do this, enter the number of pieces using the number keys and press
The button
. To delete press the button
.
4.06 memory
Press the key
after the display has stabilized to store the current value in the internal memory.
The weight display now shows the number of stores (max. 99) and the total number of all stores in the
Unit Weight Display. If "OL" appears on the display, the internal memory is full and must be deleted. To
clear the memory, press the button.
Important: The balance must be unloaded after each saving process so that a new value can be
saved.
- 5 -
