Manual
5
3 System description
3.1 Device
1.
Heat protection plate
2.
Wind shield
3.
Insertion aid
4.
Pan retainer
5.
sample pan
Assemble the parts as illustrated above.
1. Start with the heat protection plate (1).
2. The notch in the side wall of the wind shield (2) must be placed in a way that it faces the user.
3. The handle of the insertion aid (3) is placed to rest in this notch.
4. Place the sample pan retainer (4) in the middle of the measuring chamber. Make sure that the
cone of the sample pan retainer rests in the guide properly
5. The sample pan (5) is the last part you need to install.
