Manual
15
5.4 Print out results (optional)
You can print out the measurement results by using the optional PCE-BP 1 printer. To do so, follow these
steps:
1. Make sure that the printer is set up properly and both devices are connected to each other.
2. During operation, press and hold the
key until “PrInT” appears in the display.
3. After this, the options “L-C” (Chinese print-out) and “L-E” (English print-out) will appear in the
display. Use the arrow keys
and
to select the desired option and press the
key to
confirm.
4. After this, numbers from 1 to 5 will appear in the display which represent the last 5
measurements (which are stored in the device). Select a measurement by using the arrow keys
and
and press the
key to confirm.
5. The data is now sent to the printer via the RS-232 interface.
Print-out:
6 Troubleshooting
Error message
Error cause
Possible solution
-Err 1-
Sample weight below 1 g
Put more than 1 g of the sample on the scales
and start the measurement.
-Err 2-
Temperature setting below +40
°C
Restart the scales.
-Err 3-
Measuring time setting below 30
seconds.
Restart the scales.
-Err 4-
Halogen lamp problem
Please contact our technical support.
-Err 5-
Time setting for slow heat-up
mode below 3 minutes
Restart the scales.
-Err 6-
Temperature sensor broken
Please contact our technical support.
