© PCE Instruments
5
6.2
Data logger function
Press the logger key (3-2) for more than 2 seconds until the display shows
"DATALOGGER". Now the data logger starts to save measured values.
If you want to switch off the data logger function, you must press the logger key (3-2)
again for more than 2 seconds. The "DATALOGGER" indicator then disappears from the
display.
in chapter 8.3, it is described how to set the recording interval; in chapter 8.4, it is
described how to set the beeper.
Note:
Before removing the SD card, make sure that the data logger function is stopped.
Otherwise, you may lose data from the SD card.
6.3
Time information
If you press and hold down the time key (3-3) for more than 2 seconds, the following data
appears in the display: year/month/day, hour/minute/second and the recording interval.
6.4
SD card data structure
1.
When you first insert the card into the meter, it generates a folder on the memory
card:
HBA01
2.
When you start the data logger function for the first time, the meter generates a file
under the
HBA01\
folder with the name HBA01001.xls. The data is then saved to
this file. As soon as there are 30,000 data records in this file, a new file is created.
This file then has the name HBA01002.xls.
3.
When 99 files are stored in the
HBA01
folder, the machine creates a new folder with
the name:
HBA02\...
4.
This results in the following structure:
HBA01\
HBA01001.xls
HBA01002.xls
.
.
.
...
HBA01099.xls
HBA02\
HBA02001.xls
HBA02002.xls
.
.
.
...
HBA02099.xls
HBAXX\
...
Note:
The highest value XX can stand for is 10.
