© PCE Instruments
29
Eng
li
s
h
5.1.4.2
How to make a route measurement
Connect the acceleration sensor to connection socket 1 of the meter and
attach the measuring head of the sensor to the measurement spot on the
machine. In the main menu, use the navigation key
to go to
”Documents“ and confirm with Enter
. Find the route file (routes.src) in
“Documents“ and confirm with Enter
. The file could be in a subfolder.
Select the route point with the
keys. As you can see from the
images, the route points are
numbered by “point …” in the upper left
corner. Start the route measurement by pressing Enter
. In route
measurement mode, the readings are collected in line with the set
parameters.
Wait until “100 %“ is displayed on the screen. The file is saved to
“Documents“. To leave route measurement, press the Back key .
Summary of Contents for VM 20
Page 35: ...PCE Instruments...
