PCE Health and Fitness VM 20, User Manual

Page: 25 / 36

© PCE Instruments
22
Eng
li
s
h
4.2.3 Unit
The
“Units“ setting is “metric“ and cannot be changed.
4.2.4 Automatische Power Off
In the sub-
menu “Settings“, navigate to “Auto OFF“ by using the
keys and confirm with Enter . Set the desired power off time with the
keys and confirm your entry with .
4.2.5 Doc
Fields…
The setting
„Doc Fields“ is not available.
5 Operation
5.1 Vibration measurement
Connect the acceleration sensor AC 102-1A to connection socket 1 of
the meter.
In the main menu, select “Vibrometer“ by using the
keys
and confirm your selection with Enter .
Selection
Now select one out of four measuring modes. To do so, navigate up and down with the keys
to highlight the desired mode. If you wish to previously change the settings for the selected
parameter, press the Menu key
(See 5.1.1). If you do not wish to change the setting, directly
press Enter to enter measurement mode.
Measuring mode Description
Acceleration Vibration acceleration [mm/s
2
]
Velocity Vibration velocity [mm/s]
Displacement Vibration displacement [µm]
ISO 10816 Analysis mode according to the standard ISO 10816 [mm/s]