© PCE Instruments
21
Thank you for purchasing an ultrasonic flow meter from PCE Instruments.
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage
or injuries caused by non-observance of the manual are excluded from our liability and not covered by
our w arranty.
The device must only be used w ithin the approved temperature range:
Environmental humidity max. <80 % RH
Environmental temperature 0 ... +70
°C
Do not expose the device to extreme temperatures, direct sunlight, extreme humidity,
condensation or moisture.
Never use the instrument w hen your hands are wet.
Before taking a measurement, the device should be stabilised to the ambient temperature
(important w hen carrying the device from cold to w arm rooms and vice versa).
Avoid strong shocks.
Do not use the meter around corrosive or explosive gases.
The case should only be opened by qualified PCE Instruments personnel.
Repairs and maintenance w ork may only be carried out by qualified PCE Instruments
personnel.
Never place the front side of the device on a w orkbench or w ork surface to avoid damage
to the operating elements.
You must not make any technical changes to the device.
Keep the flow meter clean and dry.
The appliance should only be cleaned w ith a damp cloth. Use only pH-neutral cleaner, no
abrasives or solvents.
Non-observance of the safety notes can cause damage to the device and injuries to the
user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms w hich can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at the
end of this manual.
E
n
g
lis
h
