© PCE Instruments
28
5.2.5
View/delete saved data
The internal memory can fit up to 99 readings for each measuring parameter (pressure, velocity
and air flow). You can access the memory at any time. If the memory is full and you try to save
a new reading, the display shows “FU” (full) and the device gives out a beeping noise.
To view saved data, follow these steps:
1.
Press “
P/V/F
” to select the measuring parameter of which you want to see the saved
data.
2.
Press and hold the “
Avg/Rec
” key to enter the memory. Now you can see the reading
which has been saved last. Use “
Unit
▲“ and „
Unit
▼” to find the desired reading.
3.
When more than one reading has been saved, the device can calculate the mean
value by pressing the “
Avg/Rec
” key.
4.
Press and hold “
Avg/Rec
” for 2 seconds to exit the memory function.
To delete a reading, follow these steps:
1.
Press “
P/V/F
” to select the measuring parameter of which you want to see the saved
data.
2.
Press and hold the “
Avg/Rec
” key to enter the memory. Now you can see the reading
which has been saved last. Use “
Unit
▲“ and „
Unit
▼” to find the desired reading.
3.
Press “
Save/Clear
” to delete the selected reading. Keep in mind, that the displayed
number of readings changes.
4.
Press and hold “
Avg/Rec
” for 2 seconds to exit the memory function.
5.3
Settings
Press and hold the “
Setup
“ key for 2 seconds to enter the Settings. A “SETUP” indication
appears on the display.
In the settings, you have the following options:
Menu item
Option
Unit
Set duct dimension units
Duct Shape
Set duct shape and dimensions
Type
Select the measuring modes which are accessible by pressing
the “
P/V/F
” key
SLP
Turn auto power-off function on/off
ALL
Clear the internal memory
Press the “
Unit
▲“ and „
Unit
▼” keys to navigate through the different settings and to
adjust the values.
Press “
Avg/Rec
” to confirm the selection and to save the adjusted values.
ATTENTION:
You cannot enter the settings while the MIN/MAX/AVG mode is active.
En
g
li
s
h
