3.
Measuring
Turn on the instrument, and go to the measuring interface. If no parameter setting is
needed, simple measurement can be done.
Turn on the instrument; click the Enter button
to go to main menu.
3.1.
Start measuring
Select
Start measuring
from the menu and press
to enter measuring mode. In this
mode, you can take measurement.
3.2.
Test mode setup
Select
Test mode setup
from the menu and press
to enter test mode setup interface.
3.2.1.
New project
Select
New project
and press
to enter New project interface, it will create a new part.
The default setting for the new part is as below:
Part name is GJXXX, like GJ001
Number of test time is 16
Number of test zone is 16
Summary of Contents for PCE-HT 224E
