28
Motherboard User’s Guide
Supervisor Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all
default values; or select [Cancel], and then <Enter>, the Setup Utility does not
load default values.
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Supervisor Password : Not Installed
Change Supervisor Password
Installed or Change the
password
Change Supervisor Password
You can select this option and press<Enter> to access the sub menu. You can use
the sub menu to change the supervisor password.
Press Enter
Note
: It is highly recommend that users enter this option to load optimal default
values for accessing the best performance.
