7
Chapter 2: Motherboard Installation
I/O Port
s (Optional)
The illustration below shows a side view of the built-in I/O ports on the
motherboard.
PS/2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing
device.
PS/2 Keyboard
Use the low er PS/2 port to connect a PS/2
keyboard.
Parallel Port (LPT1)
Use the Parallel port to connect printers or other
parallel communications devices.
COM1
Use the COM port to connect serial devices such
as mice or fax/modems. COM1 is identified by the
system as COM1.
VGA
Use the VGA port to connect VGA devices.
LAN Port (optional)
Connect an RJ-45 jack to the LAN port to connect
your computer to the Netw ork.
USB Ports
Use the USB ports to connect USB devices.
Audio Ports
Use these three audio jacks to connect audio
devices. The first jack is for stereo Line-In signal,
the second jack for stereo Line-Out signal, and the
third jack for Microphone.
Use these audio jacks to connect audio devices.
The Aport is for stereo Line-In signal, w hlie the C
port is for microphone in signal. The motherboard
supports 8-channel audio devices that correspond
to A, B, D and E port respectively. In addition, all of
the three ports, A, B and D provide users w ith
both right & left channels individually.
