24
Motherboard User’s Guide
Resume On RTC Alarm
The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
Resume On Ring
An input signal on the serial Ring indicator (RI) line (in other words, and
incoming call on the modem) awakens the system from a soft off state.
Resume On PME
The system can be turned off with a software command. If you enable this
item,the system can automatically resume if there is an incoming call on the PCI
Modem or PCI LAN card. You must use an ATX power supply in order to use
this feature. Use this item to do wake-up action if inserting the PCI card.
Resume On PS/2 Mouse
These items enable or disable you to allow moused activity to awaken the
system from power saving mode.
Resume by PCI-E PME
This item specifies whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its
operating status.
Soft-off by PWR-BTTN
This item lets you install a software power down that is controlled by the power
buttonon your system. If the item is set to Instant-Off, then the power button
cause a software power down. If the item is set to Delay 4 Sec. Then you have
to hold the power button down for four seconds to cause a software power
down.
USB Resume from S3
This option allows the activity of the USB devices (keyboard and mouse) to
wake-up the system from S3 sleep state.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend
mode.
