63
LPT & COM
Default: LPT/COM
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the serial ports, or the
parallel port.
HDD & FDD
Default: ON
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the hard disk drive or
the floppy diskette drive.
PCI Master
Default: Off
When set to Off any PCI device with Master function will not power on
the system.
PowerOn by PCI Card
Default: Enabled
Use this item to enable PCI activity to wakeup the system from a power
saving mode.
Wake Up On LAN/Ring
Default: Disabled
Use this item to enable LAN or modem activity to wakeup the system
from a power saving mode.
RTC Alarm Resume
Default: Disabled
When set to Enabled, the following two fields become available and you
can set the date (day of the month), hour, minute and second to turn on
your system. When set to 0 (zero) for the day of the month, the alarm
will power on your system every day at the specified time.
Primary INTR
Default: ON
Set Primary INTR to ON to allow you to enable or disable IRQ 3
through IRQ 15 activity monitoring. Set it to OFF to disable IRQ activity
monitoring.
IRQs Activity Monitoring
This item opens a submenu that enables you to set IRQs that will re-
sume the system from a power saving mode. Select IRQs Activity
Monitoring and press <Enter> to display the following menu:
