27
Installation Procedure
There are two slots for memory modules. You must install at
least one module, and it makes no difference which slot you use
to install the module. Each module can be populated with from
32 MB to 512 MB of memory; total memory capacity is 1 GB.
1. Locate the DIMM slots on the mainboard.
Locking latches
Memory module
DIMM1
DIMM2
DIMM3
2. The DIMM slots are keyed with notches and the DIMMs are
keyed with cutouts so that they can only be installed cor-
rectly. Check that the cutouts on the DIMM module edge
connector match the notches in the DIMM slot.
3. Push the latches on each side of the DIMM slot down.
4. Install the DIMM module into the slot and press it firmly
down so that it seats correctly. The latches at either side of
the slot will be levered upwards and latch on to the edges of
the DIMM when it is installed correctly.
