PCchips M902 Series, User Manual

Page: 32 / 48

Mainboard User’s Manual
Quick Boot If you enable this item, the system starts
up more quickly be elimination some of
the power on test routines.
1 st Boot Device
2 nd Boot Device
3 rd Boot Device
Use these items to determine the device
order the computer uses to look for an
operating system to load at start-up time.
Try Other Boot
Device If you enable this item, the system will
also search for other boot devices if it
fails to find an operating system from the
first two locations.
S.M.A.R.T. for
Hard Disks Enable this item if any IDE hard disks
support the S.M.A.R.T. (Self-
Monitoring, Analysis and Reporting
Technology) feature.
Floppy Drive
Swap If you have two diskette drives installed
and you enable this item, drive A
becomes drive B and drive B becomes
drive A.
Floppy Drive
Seek If you enable this item, your system will
check all floppy disk drives at start up.
Disable this item unless you are using an
old 360KB drive.
PS/2 Mouse
Support Enable this item if you plan to use a PS/2
mouse.
Password Check If you have entered a password for the
system, use this item to determine, if the
password is required to enter the Setup
Utility (
Setup ) or required both at start-
up and to enter the Setup Utility
(
Always ).
L2 Cache Leave these items enabled since all the
processors that can be installed on this
board have internal L2 cache memory.
System BIOS
Cacheable If you enable this item, a segment of the
system BIOS will be copied to main
memory for faster execution.
SDRAM Timing
By SPD This item allows you to enable or disable
the SDRAM timing defined by the Serial
Presence Detect electrical.
28