RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can
set the date (day of the month), hour, minute and second to turn on
your system. When set to 0 (zero) for the day of the month, the alarm
will power on your system every day at the specified time.
IRQs Activity Monitoring
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Item Help
Primary INTR
[ON]
IRQ 3 (COM2)
[Enabled]
IRQ 4 (COM1)
[Enabled]
IRQ 5 (LPT2)
[Enabled]
IRQ 6 (Floppy Disk)
[Enabled]
IRQ 7 (LPT1)
[Enabled]
IRQ 8 (RTC Alarm)
[Disabled]
IRQ 9 (IRQ2 Redir)
[Disabled]
IRQ 10 (Reserved)
[Disabled]
IRQ 11 (Reserved)
[Disabled]
IRQ 12 (PS/2 Mouse)
[Enabled]
IRQ 13 (Coprocessor)
[Enabled]
IRQ 14 (Hard Disk)
[Enabled]
IRQ 15 (Reserved)
[Disabled]
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
This screen enables you to set IRQs that will resume the system from
a power saving mode.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the
system from a power saving mode.
Press <Esc> to return to the Power Management Setup screen.
PNP/PCI Configurations
This section describes configuring the PCI bus system. PCI
(Peripheral Component Interconnect) is a system, which allows I/O
devices to operate at speeds nearing CPU’s when they communicate
with own special components.
All the options describes in this section are important and technical
and it is strongly recommended that only experienced users should
make any changes to the default settings.
38
