DRAM Burst Length (4)
This item describes which burst lengths are supported by the devices
on the mainboard. 1 level can provide faster performance but may
result in instability whereas 8 level gives the most stable but slowest
performance.
DRAM Queue Depth (4 level)
This item sets the depth of the DRAM queue used for CPU’s cache.
DRAM Command Rate (2T Command)
This item enables you to specify the waiting time for the CPU to issue
the next command after issuing the command to the DDR memory.
We recommend that you leave this item at the default value.
Press <Esc> to return to the Advanced Chipset Setup screen.
AGP & P2P Bridge Control
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
AGP & P2P Bridge Control
Item Help
AGP Aperture Size
[128M]
AGP
Mode
[2X]
AGP Driving Control
[Auto]
x AGP Driving Value
DA
AGP 3.0 Calibration Cycle
[Enabled]
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
AGP Aperture Size (128 MB)
This item defines the size of the aperture if you use an AGP graphics
adapter. The AGP aperture refers to a section of the PCI memory
address range used for graphics memory. We recommend that you
leave this item at the default value.
AGP Mode (2X)
This item allows you to enable or disable the caching of display data
for the processor video memory. Enabling AGP-2X Mode can greatly
improve the display speed. Disable this item if your graphics display
card does not support this feature.
29
