IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
Item Help
VGA
[OFF]
LPT & COM
[LPT/COM]
HDD & FDD
[ON]
PCI
Master
[OFF]
PowerOn by PCI Card
[Enabled]
Modem Ring Resume
[Disabled]
RTC Alarm Resume
[Disabled]
x Date (of Month)
0
x Resume Time (hh:mm:ss)
0 0 0
IRQs Activity Monitoring
[Press Enter]
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
This item opens a submenu that enables you to set events that will
resume the system from a power saving mode.
VGA (Off)
When set to On, the system power will resume the system from a
power saving mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the serial ports, or
the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the hard disk drive
or the floppy diskette drive.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on
the system.
PowerOn by PCI Card (Enabled)
Use this item to enable PCI activity to wakeup the system from a
power saving mode.
Modem Ring Resume (Disabled)
Enable Modem Ring-in to resume the system.
37
