Model Number
M1204-13A
LOW PROFILE LOAD CELL
Revision: A
ECN #: 43809
Performance
ENGLISH
SI
Measurement Range
50 klbf
222 kN
[6][7]
Sensitivity(± 10 %)(RO)
4.0 mV/V
4.0 mV/V
[3][1]
Non-Linearity
≤ 0.05 % FS
≤ 0.05 % FS
[6][8]
Hysteresis
≤ 0.06 % FS
≤ 0.06 % FS
[6][8]
Non-Repeatability
≤ 0.01 %RO
≤ 0.01 %RO
[3][8]
Eccentric Load Sensitivity
0.25 %/in
0.25 %/25.4mm
[8]
Resonant Frequency
15 kHz
15 kHz
Side Load Sensitivity
0.25 %/in
0.25 %/25.4mm
[8]
Creep(in 20 minutes)
0.025 %
0.025 %
[8]
Static Error Band
≤ 0.05 % FS
≤ 0.05 % FS
[6][8]
Environmental
Overload Limit
75 klbf
334 kN
Load Limit(Side Force, F
X
or F
Y
)
25 klbf
111 kN
[4]
Load Limit
(Bending Moment, M
X
or M
Y
)
25 klbf-in
2825 Nm
[4]
Load Limit
(Axial Torque, M
Z
)
25 klbf-in
2825 Nm
[4]
Temperature Range(Operating)
-65 to +200 °F
-54 to +93 °C
Temperature Range
(Compensated)
+15 to +115 °F
-9 to +46 °C
Temperature Effect on Output(Maximum)
± 0.0008 %Reading/°F
± 0.0018 %Reading/°C
[5]
Temperature Effect on Zero Balance(Maximum)
± 0.0008 %FS/°F
± 0.0018 %FS/°C
[5]
Electrical
Bridge Resistance
350 Ohm
350 Ohm
[1]
Excitation Voltage(Recommended)
10 VDC
10 VDC
[2]
Insulation Resistance
>5K GOhm
>5K GOhm
Zero Balance
± 1 %RO
± 1 % FS
[3]
Output Polarity
+Tension
+Tension
Physical
Size (Diameter x Height)
6.06 in x 3.50 in
153.9 mm x 88.9 mm
[9]
Weight
21 lb
9.53 kg
Mounting Thread
No English Equivalent
M33 x 2.0 4H
Housing Material
Painted Steel
Painted Steel
Sensing Element
Strain Gage
Strain Gage
Mounting Torque
1400 lbf-in
158 Nm
Deflection at Full Scale Capacity
0.002 in
0.05 mm
Electrical Connector
PT02E-10-6P
PT02E-10-6P
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
M1204-13B
- PC04E-10-6P Connector
M1204-13C
- PT02E-12-8P Connector
M1204-13D
- PC01E-12-8P Connector
NOTES:
[1]Nominal.
[2]Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3]RO - Rated Output.
[4]Singularly applied, i.e. no other extraneous loads.
[5]Over compensated operating temperature range.
[6]FS - Full Scale.
[7]Calibrated in tension and compression.
[8]Performance specifications guaranteed with factory installed optional Tension Base 084A101
[9]See Outline Drawing 49932 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A90 Connector Shroud
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
Model M084A101 TENSION LOAD BASE W/ M33X2 THD.
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: [email protected]
Web site:
http://www.pcbloadtorque.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: AP
Engineer: PE
Sales: JC
Approved: JSD
Spec Number:
Date: 2/16/2015
Date: 2/16/2015
Date: 2/16/2015
Date: 2/16/2015
59224
