NMS044 Reference Manual Rev E
Default NMS044 Setup File
4-2
4.3 Default NMS044 Setup File
For convenience, there is a default setup file for the NMS044 on the
meter that can be set to Active. If you make any changes to this setup,
you can save it as a custom setup file for multiple use, even transferring
it to a PC to be transfered to any number of meters. To do this, follow
these steps:
Step 1
Using G4, mobile device, or the meter itself navigate to the
Setup Manager for the meter. (
Tools
Setup Manager
)
Step 2.
Select the setup “NMS044”, press
Enter
.
Step 3.
Select Set to
Active
.
FIGURE 4-2
Set to Active
The NMS044 setup file contains metrics that are commonly measured
when measuring outdoor noise. These default settings will log one
hour intervals, daily results, and one second time histories to view
noise levels as a function of time. Triggers SPL 2 (set to 65 dB) and/or
PEAK 3 (set to 140 dB) will send email alerts any time there is an event
detected. This default setup is described below.
