Model Number
356A02
TRIAXIAL ICP® ACCELEROMETER
Revision: R
ECN #: 43905
Performance
ENGLISH
SI
Sensitivity(± 10 %)
10 mV/g
1.02 mV/(m/s²)
Measurement Range
± 500 g pk
± 4900 m/s² pk
Frequency Range(± 5 %)
1 to 5000 Hz
1 to 5000 Hz
Frequency Range
(± 10 %)
0.5 to 6000 Hz
0.5 to 6000 Hz
Resonant Frequency
≥ 25 kHz
≥ 25 kHz
Broadband Resolution(1 to 10,000 Hz)
0.0005 g rms
0.005 m/s² rms
[1]
Non-Linearity(400 g, 3920 m/s²)
≤ 1 %
≤ 1 %
[4]
Non-Linearity
(500 g, 4900 m/s²)
≤ 2 %
≤ 2 %
[4]
Transverse Sensitivity
≤ 5 %
≤ 5 %
Environmental
Overload Limit(Shock)
± 7000 g pk
± 68,600 m/s² pk
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
[3]
Temperature Response
See Graph
See Graph
[3][1]
Base Strain Sensitivity
0.001 g/µε
0.01 (m/s²)/µε
[1]
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤ 200 Ohm
≤ 200 Ohm
Output Bias Voltage
8 to 12 VDC
8 to 12 VDC
Discharge Time Constant
0.6 to 2.0 sec
0.6 to 2.0 sec
Settling Time(within 10% of bias)
<5 sec
<5 sec
Spectral Noise(1 Hz)
150 µg/√Hz
1472 (µm/sec
2
)/√Hz
[1]
Spectral Noise
(10 Hz)
25 µg/√Hz
245 (µm/sec
2
)/√Hz
[1]
Spectral Noise
(100 Hz)
10 µg/√Hz
98 (µm/sec
2
)/√Hz
[1]
Spectral Noise
(1 kHz)
5 µg/√Hz
49 (µm/sec
2
)/√Hz
[1]
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Height x Length x Width)
0.55 in x 0.80 in x 0.55 in
14.0 mm x 20.3 mm x 14.0 mm
Weight
0.37 oz
10.5 gm
[1]
Electrical Connector
1/4-28 4-Pin
1/4-28 4-Pin
Electrical Connection Position
Side
Side
Mounting Thread
10-32 Female
10-32 Female
Mounting Torque
10 to 20 in-lb
113 to 225 N-cm
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
HT
- High temperature, extends normal operation temperatures
Frequency Range(± 5 %)
1 to 5000 Hz
1 to 5000 Hz
Frequency Range
(± 10 %)
0.7 to 6000 Hz
0.7 to 6000 Hz
Broadband Resolution(1 to 10,000 Hz)
0.0008 g rms
0.008 µm/sec
2
rms
Temperature Range(Operating)
-65 to +325 °F
-54 to +163 °C
Excitation Voltage
22 to 30 VDC
22 to 30 VDC
Output Bias Voltage
7 to 15 VDC
7 to 15 VDC
[2]
Discharge Time Constant
0.5 to 1.5 sec
0.5 to 1.5 sec
Spectral Noise(1 Hz)
400 µg/√Hz
3920 (µm/sec
2
)/√Hz
Spectral Noise
(10 Hz)
50 µg/√Hz
490 (µm/sec
2
)/√Hz
Spectral Noise
(100 Hz)
25 µg/√Hz
245 (µm/sec
2
)/√Hz
Spectral Noise
(1 kHz)
6 µg/√Hz
58.8 (µm/sec
2
)/√Hz
RH
- RoHS Compliant
T
- TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
TLA
- TEDS LMS International - Free Format
TLB
- TEDS LMS International - Automotive Format
TLC
- TEDS LMS International - Aeronautical Format
TLD
- TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
Temperature Range
-65 to +250 °F
-54 to +121 °C
Output Bias Voltage
8.5 to 13.0 VDC
8.5 to 13.0 VDC
NOTES:
[1]Typical.
[2]TEDS option adds 1.0 VDC to bias voltage.
[3]250° F to 325° F data valid with HT option only.
[4]Zero-based, least-squares, straight line method.
[5]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 080A109 Petro Wax (1)
Model 080A12 Adhesive Mounting Base (1)
Model 080A90 Quick Bonding Gel (1)
Model 081B05 Mounting Stud (10-32 to 10-32) (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Model M081B05 Mounting Stud 10-32 to M6 X 0.75
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: AP
Engineer: DK
Sales: WDC
Approved: BAM
Spec Number:
Date: 3/10/2015
Date: 3/10/2015
Date: 3/10/2015
Date: 3/10/2015
10927
