Model Number
482C15
FOUR-CHANNEL, ICP SENSOR SIGNAL CONDITIONER
Revision: J
ECN #: 47052
[6]
Performance
ENGLISH
SI
Channels
4
4
Sensor Input Type(s)
ICP®, Voltage
ICP®, Voltage
[2]
Voltage Gain(± 1 %)(at 500 Hz)
x1, x10, x100
x1, x10, x100
[2]
Output Range(Maximum)
± 10 V
± 10 V
Low Frequency Response(-5 %)
<0.05 Hz
<0.05 Hz
[5][3]
High Frequency Response(-3 dB)(x100)
>50 kHz
>50 kHz
High Frequency Response
(-5 %)(x100)
>17 kHz
>17 kHz
High Frequency Response
(-5 %)(x1)
>100 kHz
>100 kHz
High Frequency Response
(-5 %)(x10)
>40 kHz
>40 kHz
High Frequency Response
(-3 dB)(x1,x10)
>100 kHz
>100 kHz
Phase Response(at 1 kHz)
± 1 °
± 1 °
Cross Talk(maximum)
-72 dB
-72 dB
Fault/Bias Monitor/Meter(LED)
Open/Short/Overload
Open/Short/Overload
Environmental
Temperature Range(Operating)
+32 to +120 °F
0 to +50 °C
Electrical
Power Required(for supplied AC power adaptor)
AC Power
AC Power
Power Required
(direct input to unit)
DC Power
DC Power
AC Power(47 to 63 Hz)
100 to 240 VAC
100 to 240 VAC
AC Power
≤
0.7 Amps
≤
0.7 Amps
DC Power
<0.25 Amps
<0.25 Amps
DC Power
+32 to 38 VDC
+32 to 38 VDC
Excitation Voltage(± 1 VDC)(To Sensor)
+26 VDC
+26 VDC
DC Offset
<20 mV
<20 mV
Constant Current Excitation(To Sensor)
0 to 20 mA
0 to 20 mA
[1]
Overload Threshold(± 1.0 Vpk)
± 10/5 Vpk
± 10/5 Vpk
[2]
Discharge Time Constant(0 to 50 %)
>7 sec
>7 sec
[3]
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x1)
5.6 µV rms
5.6 µV rms
[4]
Spectral Noise(1 Hz)
0.67 µV/
√
Hz
0.67 µV/
√
Hz
[4]
Spectral Noise
(10 Hz)
0.10 µV/
√
Hz
0.10 µV/
√
Hz
[4]
Spectral Noise
(100 Hz)
0.06 µV/
√
Hz
0.06 µV/
√
Hz
[4]
Spectral Noise
(1 kHz)
0.06 µV/
√
Hz
0.06 µV/
√
Hz
[4]
Spectral Noise
(10 kHz)
0.05 µV/
√
Hz
0.05 µV/
√
Hz
[4]
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x10)
21 µV/rms
21 µV/rms
[4]
Spectral Noise(1 Hz)
5.10 µV/
√
Hz
5.10 µV/
√
Hz
[4]
Spectral Noise
(10 Hz)
0.60 µV/
√
Hz
0.60 µV/
√
Hz
[4]
Spectral Noise
(100 Hz)
0.22 µV/
√
Hz
0.22 µV/
√
Hz
[4]
Spectral Noise
(1 kHz)
0.22 µV/
√
Hz
0.22 µV/
√
Hz
[4]
Spectral Noise
(10 kHz)
0.19 µV/
√
Hz
0.19 µV/
√
Hz
[4]
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x100)
165 µV/rms
165 µV/rms
[4]
Spectral Noise(1 Hz)
57 µV/
√
Hz
57 µV/
√
Hz
[4]
Spectral Noise
(10 Hz)
5.2 µV/
√
Hz
5.2 µV/
√
Hz
[4]
Spectral Noise
(100 Hz)
1.7 µV/
√
Hz
1.7 µV/
√
Hz
[4]
Spectral Noise
(1 kHz)
1.8 µV/
√
Hz
1.8 µV/
√
Hz
[4]
Spectral Noise
(10 kHz)
1.4 µV/
√
Hz
1.4 µV/
√
Hz
[4]
Physical
Electrical Connector(ICP® Sensor Input)
BNC Jack
BNC Jack
Electrical Connector
(Output)
BNC Jack
BNC Jack
Electrical Connector
(DC Power Input)
5-socket DIN (female)
5-socket DIN (female)
Size (Height x Width x Depth)
3.2 in x 8.0 in x 5.9 in
8.1 cm x 20 cm x 15 cm
Weight
1.25 lb
567 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] User adjustable, factory set at 4 mA (± 0.5 mA). One control adjusts all channels.
[2] Jumper selectable on internal circuit board.
[3] Un-buffered output, read out device input impedance affects discharge time constant and low
frequency response of unit.
[4] Typical.
[5] The low frequency tolerance is accurate within ±25% of the specified frequency.
[6] See PCB Declaration of Conformance PS024 for details.
SUPPLIED ACCESSORIES:
Model 017AXX Power Cord (1)
Model 488B04/NC Power Convertor (1)
Entered: LK
Engineer: CPH
Sales: ML
Approved: ECB
Spec Number:
Date: 7/18/2017
Date: 7/18/2017
Date: 7/18/2017
Date: 7/18/2017
38208
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
