Model Number
204C
ICP® FORCE SENSOR
Revision: G
ECN #: 48681
[5]
Performance
ENGLISH
SI
Sensitivity(± 15 %)
0.12 mV/lb
27.0 mV/kN
Measurement Range(Compression)
40,000 lb
177.92 kN
Maximum Static Force(Compression)
50,000 lb
222.4 kN
Broadband Resolution(1 to 10,000 Hz)
0.80 lb-rms
3.6 N-rms
[1]
Low Frequency Response(-5 %)
0.0003 Hz
0.0003 Hz
[2]
Upper Frequency Limit
55 kHz
55 kHz
[3]
Non-Linearity
≤
1.5 % FS
≤
1.5 % FS
[4]
Environmental
Temperature Range
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤
0.08 %/°F
≤
0.14 %/°C
Electrical
Discharge Time Constant(at room temp)
≥
2000 sec
≥
2000 sec
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Spectral Noise(1 Hz)
0.088 lb/
√
Hz
0.39 N/
√
Hz
[1]
Spectral Noise
(10 Hz)
0.025 lb/
√
Hz
0.11 N
√
Hz
[1]
Spectral Noise
(100 Hz)
0.0060 lb/
√
Hz
0.0266 N/
√
Hz
[1]
Spectral Noise
(1 kHz)
0.0016 lb/
√
Hz
0.00719 N/
√
Hz
[1]
Output Polarity(Compression)
Positive
Positive
Physical
Preload
8000 lb
35.585 kN
Stiffness
29 lb/µin
5 kN/µm
[1]
Size (Diameter x Height x Bolt Diameter x Sensing Surface) 1.34 in x 0.47 in x 0.625
in x 1.10 in
34 mm x 12 mm x 16
mm x 28 mm
Size (ID)(Hole Diameter)
0.660 in
16.76 mm
Size (OD)(Sensor)
1.340 in
34 mm
Weight
2.0 oz
57 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Side
Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
M
- Metric Mount
Supplied Accessory : Model M081A14 Mounting Stud, M14 x 1.25 x 1.400, BeCu (1)
Supplied Accessory : Model M083B04 Pilot Bushing (1)
N
- Negative Output Polarity
Output Polarity(Compression)
Negative
Negative
W
- Water Resistant Cable
Electrical Connector
Sealed Cable
Sealed Cable
Electrical Connection Position
Side
Side
NOTES:
[1] Typical.
[2] Calculated from discharge time constant.
[3] Estimated using rigid body dynamics calculations.
[4] Zero-based, least-squares, straight line method.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 080A82 Assembly Lubricant (1)
Model 081A14 Mounting Stud,1/2-20 x 1.400, BeCu (1)
Model 082B04 Anti-friction washer (for Models 204C and 214B) (1)
Model 083B04 Pilot bushing (for Models 204C and 214B) (1)
Entered: LK
Engineer: RPF
Sales: KK
Approved: RPF
Spec Number:
Date: 9/19/2018
Date: 9/19/2018
Date: 9/19/2018
Date: 9/19/2018
5874
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]