PC-EFTPOS ANZ, Quick Reference Manual

Page: 8 / 28

KEYBOARD TEST?
Press [ENTER] to accept, [CLEAR] to go forward one menu, [CANCEL] to exit.
DISPLAY TEST?
Press [ENTER] to accept, [CLEAR] to go forward one menu, [CANCEL] to exit.
PRINTER TEST?
Press [ENTER] to accept, [CLEAR] to go forward one menu, [CANCEL] to exit.
9905 - Configuration Functions
Terminal Display Response Description
SET CONFIG
PARAM?
Press [ENTER] to accept,
[CLEAR] , [CANCEL] to exit.
Request access to the configuration functions.
TERMINAL ID?
Press [ENTER] if no Terminal ID is
required. Alternatively enter a
terminal ID.
This prompt is only displayed if the [CLEAR] key is
pressed at the ENTER CARD prompt. Terminal ID
as assigned by ANZ.
If the terminal ID is changed the terminal is require
to logon. If there are any pending TIP or SAF
transactions the terminal ID cannot be changed and
this prompt is replaced with ‘ADVICE PENDING’.
POS?
Press [ENTER] if no POS is
required. Alternatively, enter a POS
number.
POS - this is a concatenation of the Tran$end ID and
Terminal AME in Hex and converted to decimal.
COMMS MODE?
Enter the comms mode. Press
[ENTER] to continue.
The COMMS Mode indicates the method of
communication:
1 = Telstra Dial-up Network
2 = Optus Dial-up Network
4 = Dial-up using CLNP headers for EFTPOS and
TMS (default)
5 = Dial-up using CLNP headers for EFTPOS.
TPDU headers for TMS and TMS dials its own
number.
DIAL MODE?
Enter the dial mode. Press [ENTER]
to continue.
The Dial Mode indicates the method of dialling:
1 = Tone Dial
2 = Pulse Dial
3 = Tone with blind dial
4 = Pulse with blind dial
PABX?
Press [ENTER] if no PABX is
required. Alternatively, enter the
PABX.
Prompts the user to enter a PABX number. After a
PABX number is entered, press [ENTER] to
proceed. It is possible to insert a control character
‘A’ via the alpha key entry. This forces the terminal
to pause for 1 second before dialling the host phone
number. This prompt is not displayed if comms
mode of leased line is selected.
Confidential Page 8 5/23/2007