DCH-5100P
Multi-Format Professional HDTV Processor
4
Pro Broadband Inc.
B23
AUDIO2
AES/EBU and Balance Audio output port2 (need to use
the RS232-to-XRL converting cable in accessories)
B24
TUNER OUT
Tuner signal loop through output port
B25
TUNER IN
Tuner signal input
B26 GND
Grounding
terminal
B27
Power Socket
AC 90~250V 50-60Hz input
B28 Switch
Power
switch
3.5 Power On the Device
Be sure the device is mounted into the rack properly and firmly, and the signal cables are
connected well, then power can be applied to the device. The main socket and fuse are located at
the rear panel of the device.
When the device is powered on, verify that the display shows the following message:
Digital TV Processor (factory default unit-name)
IP: 10.10.60.148 (factory default IP Address for LAN access)
If no message is shown in the display or there is not light in the display, the device is defective
and has to be returned for servicing.
4 Navigating the Front Panel
A1
POWER
Power indicator, green light means power is OK
A2
TUNER LOCK
Tuner lock indicator, green light means signal is locked; if
there is no light, which means no signal input or wrong
parameters setting.
A3 ALARM
Alarm
indicator
A4
LCD
2 × 20 character LCD
A5-A10 Operation
buttons
〔 〕〔 〕〔 〕〔 〕〔
ENTER
〕
〔
EXIT
〕
buttons
〔
〕〔
〕
are used to up/down pages of menu or
increase/decrease value when edit numbers
〔 〕〔 〕
are used to move cursor
〔
ENTER
〕
is used to enter sub menu or confirm operation
〔
EXIT
〕
is used to return previous menu or cancel operation
A11
Common Interface PCMCIA Module slot
A1 A2
A5
A4
A3
A6
A7 A9
A8 A10
A11