Brighten Your Digital View!
1
www.pbi-china.com
1 Before Use the Device
Thank you for purchasing the DCH-5100P series.
This User Manual is written for operators/users of the DCH-5100P Multi-Format Professional
HDTV Processor to assist in installation and operation. Please read this user manual carefully
before installation and use of the device.
For Your Safety
This equipment is provided with a protective earthing ground incorporated in the power cord.
The main plug shall only be inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor, inside or outside the device, is likely to make the
device dangerous.
Do not remove the covers of this equipment. Hazardous voltages are present within this
equipment and may be exposed if the covers are removed. Only PBI trained and approved
service engineers are permitted to service this equipment.
No operator serviceable parts inside. Refer servicing to PBI trained and approved service
engineers.
For the correct and safe use of the device, it is essential that both operating and servicing
personnel follow generally accepted safety procedures in addition to the safety precautions
specified in this manual.
Whenever it is likely that safety protection is impaired, the device must be made in-operative
and secured against unintended operation. The appropriate servicing authority must be informed.
For example, safety is likely to be impaired if the device fails to perform the intended
measurements or shows visible damage.
WARNINGS
z
The mounting environment should be relatively dust free, free of excessive vibration and the
ambient temperature between 0
℃
to 40
℃
. Relative humidity of 20% to 80% (non-condensed)
is recommended.
z
Avoid direct contact with water.
z
Never place the equipment in direct sunlight.
z
The outside of the equipment may be cleaned using a lightly dampened cloth. Do not use any
cleaning liquids containing alcohol, methylated spirit or ammonia etc.
z
For continued protection against fire hazard, replace line fused only with same type.
z
Air intake for cooling is achieved via holes at the side of the device and the fans inside. The air
flow should not be obstructed. Therefore, the device has to be placed on a flat surface,
leaving some space at the sides of the device.
z
When in operation, the internal temperature should not exceed the limit of 70
℃
.