DCH-5100P
Multi-Format Professional HDTV Processor
10
Pro Broadband Inc.
Output port Resolution
SDI port
1080ix60,1080ix50,720px50,576ix50,480ix60
HDMI port
1080ix60,1080ix50,1280x720px60,1280x720px50,
720x480px50,720x576px50,576ix50,480ix60
YPbPr port
1080ix60,1080ix50,1280x720px60,1280x720px50,
720x480px50,720x576px50,576ix50,480ix60
CVBS port
576ix50,480ix60
5.2.4 ASI1
You can configure the settings of ASI1 in this menu.
ASI1 Source: Press the <ENTER>-key and use the < > or < >-key to roll up or down to
select the signal source of ASI output, there are 5 type of signal source optional:
CI De-encrypted: the de-encrypted transport stream from CI functional portion will
be delivered to the ASI output port on the back panel.
TUNER: the transport stream from Tuner will be delivered to the ASI output port on
the back panel.
ASI1 Input: the transport stream comes from ASI1 input port will be delivered to the
ASI1 output port on the back panel.
ASI2 Input: the transport stream comes from ASI2 input port will be delivered to the
ASI2 output port on the back panel.
Mux TS: the transport stream comes from built-in Mux will be delivered to the ASI
output port on the back panel.
(The Mux TS is valid only when the built-in Mux function is enabled and turned on.
Refer to section 5.2.7 and section 5.3.6
for how to set the built-in Mux.)
Press <ENTER>-key to save or press <EXIT>-key to scrap. A few seconds after the
source being selected, the TS will be delivered to the ASI output port on the back panel.
5.2.5 ASI2
The same configuration method like section 5.2.4
5.2.6 SDI
You can configure the settings of SDI output in this menu.
Audio PID: press the < > < >-keys to choose the audio PID from 1~4.
Embed Audios: there are 4 options: none, one&two, two, and one.
SDI Output Mode: configure output mode
HD-SDI
or
SD-SDI
SDI H Offset: the range is 0~999