14
with the print & cut process of the Inspiration Vūe
™
. Each mat has
a cutting area covered with a temporary adhesive. When placing
materials on the mat to be cut, the upper right hand corner of the
material should completely cover the paper corner indicator in the
upper right hand corner of the mat.
Mat Preparation
New Mats are sticky! This allows for the widest variety of materials
to be used on the machine and, when properly prepared, the longest
life. In order to ensure the best possible experience when using the
mat, Pazzles strongly recommends preparing your mat prior to first
use. Mat preparation is recommended in order to maximize the life
of your mat. To prepare the mat:
1.
Remove the clear plastic protective sheet and set it aside. Note
which side was in contact with the the mat adhesive.
2.
Choose a piece of cardstock that you no longer want.
3.
Place it on the mat just as if you were going to cut something.
4.
Pat the cardstock down into place, then peel it off the mat.
5.
Repeat this process 6-10 times until the cardstock lifts easily
from the mat.
6.
Discard the cardstock once you have used it to prepare your
mat.
Tip: Replace the clear protective covering back on the mat
when the mat is not in use to protect the mat from dust.
Summary of Contents for Inspiration Vue
Page 1: ...Quick Start Guide TM...
