Care and Maintenance
5-5
Cleaning the Scanner Flex Cable
Occasionally, adhesive buildup
appears on the scanner flex
cable, as shown.
To clean the cable:
1.
Turn off the printer and
open the supply cover.
2.
Clean the cable with 99%
isopropyl alcohol and a
cotton swab wherever
adhesive buildup appears.
3.
Close the supply cover.
C l e a r i n g S u p p l y J a m s
To clear a supply jam:
1.
Turn off the printer and open the supply cover completely.
2.
Open the label deflector by gently pressing down on it with two fingers.
3.
Remove the supplies. See “Removing Supplies” in Chapter 3 for more
information.
4.
Carefully remove any jammed supply and close the deflector.
Note:
Do not
pull the jammed supply out through the front of the label
deflector.
Do not
use sharp objects to remove jammed supplies.
5.
Carefully remove
any jammed supply
between the pinch
and feed rollers.
6.
Clean any adhesive
buildup.
7.
Reload the supply
and close the label
deflector.
Adhesive Buildup
Scanner Flex
Cable
Feed Roller
(behind Pinch Roller)
Pinch Roller
Summary of Contents for Monarch Pathfinder Ultra Silver 6032
Page 8: ...1 4 Equipment Manual ...
Page 14: ...2 6 Equipment Manual ...
Page 38: ...G 2 Equipment Manual ...
Page 39: ......
