Paxar Monarch Pathfinder Ultra Silver 6032, Equipment Manual

Page: 24 / 40

4-4 Equipment Manual
S c a n n i n g B a r C o d e s
Your printer may have a built-in scanner.
To scan a bar code:
1.
Attach the safety strap to your wrist.
2.
Point the scanner at a slight angle
approximately 4 – 8 inches from the
bar code symbol.
3. Press the trigger or other key
specified by your System
Administrator.
Caution: Do not stare into the beam.
The scanner LED is at the top left of the keypad, opposite the On/Off key.
Scanner LED Description
Green
Successful scan.
Amber
Unsuccessful scan.
If the bar code does not scan:
♦
Change the scanner’s angle slightly and try again.
♦
Clean the scanner window. See “Cleaning” in Chapter 5 for more
information.
♦
Move the scanner 4 – 8 inches away from the bar code. Adjust this
distance as needed to find the correct distance.
♦
Try scanning another bar code that you have scanned successfully.
If that scan is successful, the scanning problem is with the bar code.
♦
Move to a more dimly lit area.
♦
Ensure there are no voids (streaks) in the bar code symbol.
If the scan is still unsuccessful, ask your System Administrator to perform a
scanner test.