Paxar Monarch 9416 XL Reference Manual Download Page 198

Page: 198 / 212

Format Header

First line of a format, immediately following the start of
packet (

{

). A format header must begin with

, followed

by various header elements.

{F,1,A,R,E,600,150,"Fmt-1"

Monospaced Fonts

All characters have the same width and are easy to
center justify. (Standard, bold, and reduced are
monospaced.)

Non-volatile RAM
(NVRAM)

Contains information that is SAVED on power-down.

Option
R,1,"Monarch"

Any line within a format that applies special formatting
to a field. This line always begins with

and must

immediately follow the field it applies to.

Packet
{B,1,N,1

2,"Monarch"

}

Any string of characters within (

{ }

Pre-image

A way to optimize the printer, because it images the
fields while data is collected. After the last field is
imaged, the label prints almost immediately.

Proportionally
Spaced Fonts

All characters have different widths and are difficult to
center justify.

Soft (Downloaded)
Fonts

Reside in the printer’s RAM. They can be erased or
overwritten.

Volatile RAM

Contains information that is LOST on power-down.

Summary of Contents for Monarch 9416 XL




















































































































































































































Search results

Summary of Contents for Monarch 9416 XL

Reviews:

Brands by name

Popular brands

Paxar Monarch 9416 XL, Reference Manual

Search results

Summary of Contents for Monarch 9416 XL

Reviews:

Brands by name

Popular brands