manualshive.com logo in svg

Paxar Monarch 9416 XL, Reference Manual

Share
Download
Paxar Monarch 9416 XL Reference Manual Download Page 138

750

Printhead is overheated.  Turn off the printer to let the
printhead cool.  If the error persists, call Technical
Support.

751

Printer did not sense a black mark when expected.  The
supply may be jammed.

For these errors, Check the 

✦

supply tracking

✦

supply marks 

✦

black mark sensor position

✦

supply roll for binding.

If the error continues to appear, change the supply.

752

Printer sensed a mark in the wrong place.

753

Printer sensed a mark that is too long.  

756

The printer is out of supplies.  Load supplies.

757

Load supplies.  The calibrated supply length differs by
plus or minus .25 inches from the format.

758

Check supply.  Either the supply is not seen, or the
on-demand sensor is broken (purchase optional).
Check for a label jam.  Clear the supply path or reload
supplies.  This error may occur if you remove a label
too quickly in on-demand mode.  The printer does not
recalibrate after this error.

762

Low battery.  Recharge the battery.

763

Waiting to dispense label.  Press FEED.

768

Printhead has more than 10 bad dots or is not
connected.  Make sure the printhead is connected.

8-16  

Troubleshooting

Summary of Contents for Monarch 9416 XL





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands