Paxar Monarch 9416 XL Reference Manual Download Page 137

Page: 137 / 212

574

No CD scheme or room for CD. The CD scheme in the
batch does not fit the format or the field contains
blanks.

575

The graphic included in your format could not be found.

611

Font, bar code or density is invalid. The font, bar code
or density in the batch does not fit the format.

612

The data in this line of the batch is either missing or
does not match the format.

613

Reference point off tag.

614

Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not enter

for

616

Dot shifting failed. A bad dot falls on a bar code that
cannot be shifted. Call Technical Support.

618

Magnification must be

621

An error occurred opening the TrueType font file. Select
a different font to download. If the error message
persists, call Technical Support.

622

Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer.

M a c h i n e F a u l t s

These errors occur when there is a problem with the printer.

703

The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.

704

Printer has not sensed a supply mark within the
specified number of inches or is out of supplies. Check
the supply tracking, supply marks, black mark sensor
position, and supply roll for binding.

Troubleshooting

8-15

Summary of Contents for Monarch 9416 XL




















































































































































































































Search results

Summary of Contents for Monarch 9416 XL

Reviews:

Brands by name

Popular brands

Paxar Monarch 9416 XL, Reference Manual

Search results

Summary of Contents for Monarch 9416 XL

Reviews:

Brands by name

Popular brands