Paxar 9840CL Page 9 User Manual Download

Page: 9 / 59

Paxar Systems Group Paxar 9840CL Printer

Getting Started - 1

••

a blinking amber light when it's ready to print a label in
the On-Demand mode. See Chapter 3, "Printing" for
more information.

Button Functions

Feed:

Prints a label in the On-Demand mode.Feeds a blank
label if there is no print job.

Prints a label with error information that is useful to your
System Administrator if an error is displayed.

Pause:

Pauses the current print job or resumes a paused print
job. When the Paused light is on, the job is paused.

Feed and Pause:

Prints a test label when you press the buttons at the
same time.

Feed and Clear:

Allows you to adjust print positions from paused mode.
See Chapter 3, "Printing" for more information.

Clear:

Clears an error.
Cancels the current print job.

Cancels all queued print jobs if pressed for two seconds.
Also clears the communication queue and cancels any
packet being received.

To cancel a single or all queued print jobs, the printer must be in paused mode before
Clear is pressed.

Status Code Box

The status code box displays a three-digit error code to identify any problem the printer
may have. For a description of the problem, look up the error code in Chapter 5,
“Troubleshooting.”

_________

If there is no error, the display will be blank.

_________

Summary of Contents for 9840CL




























































Search results

Summary of Contents for 9840CL

Reviews:

Related manuals for 9840CL

Brands by name

Popular brands

Paxar 9840CL, User Manual

Search results

Summary of Contents for 9840CL

Reviews:

Related manuals for 9840CL

Brands by name

Popular brands