21
User and installation instructions
Installer information – EN
Connection of 100-240VAC
and 12 V DC must not be done
simultaneously (Figure M).
NB. Maximum variation for 12VDC
voltage of 10 - 13.6 V DC.
NB. For 12VDC always use switches
intended for direct current, C.
M.
N.
No 100-240 V cables may
be laid over the electronics
component (Figure N).
Levante 00:
12VDC
- Start / stop via manual switch C.
- (When the fan is mounted against the outer wall,
can the fan be combined with a back draught
shutter, accessories).
Levante 30:
12VDC (switch C always on)
- Automatic forced ventilation at high humidity
levels and under the influence of changes in light.
- (When the fan is mounted against the outer wall,
can the fan be combined with a back draught
shutter, accessories).
ELECTRICAL CONNECTION 12VDC
NB. Pax recommends that electrical connection of
12VDC be performed by a qualified electrician.