background image

5.  If the LED light is flashing slowly, but the SERVED counter has not reached 6, this indicates 

that the batteries need to be changed. After changing the batteries (refer back to “Install 
Batteries” on page 3), you will need to turn the device back on and set the time. You will not 
need to reprogram the scheduled meals; those are stored in the feeder’s memory and those 
settings will not change unless you change them. 

6.  If you will be away for an extended period of time, you should install new batteries in the 

feeder before leaving. The feeder will continue to operate on a schedule, but you will still 
need to have someone refill it at the end of each day/meal cycle. Never leave wet food in the 
feeder overnight or for any extended period of time.

Safety Precautions

1.   Remove all packaging before using this device. Some items may be packed in polyurethane

bags. Please keep all packaging materials out of reach of children and pets. Properly dispose of 
all packing materials immediately after unpacking product, as the bags used for packaging could 
present a suffocation or choking hazard.

2.  Read all instructions carefully before attempting to operate this device. Improper usage could

result in your pet(s) not being fed properly or not being fed at all. Improper use or mishandling 
could also result in permanent damage to your device.

3.  Only use this feeder indoors, in a dry place, and on solid, even ground.

4.  Do not place the feeder in a closet, in a narrow/confined space, or too close to a wall or

other obstructing item. The top section of the feeder rotates a full 360° to expose the different 
feeding compartments, so your pet needs to be able to access all of the feeding compartments. 
Placing it too close to your walls or other objects may restrict your pet’s ability to access his or 
her meals.

5.  This product was not intended for use or play by children, and we recommend you do not

allow children to play or tamper with it, to reduce the risk of important settings being changed 
or damage to the feeder and its moving parts. Adult supervision should always be required when 
children are near the feeder.

6.  Do not try to disassemble the feeder or repair it on your own.

7.  The lid of the feeder is not dishwasher-safe. 

8.  The feeding bowls are dishwasher-safe.

9.  Remove all batteries if you are not using the feeder for an extended period of time.

10. Do not mix types and brands of batteries in the feeder. Batteries are not included.

6

Summary of Contents for PAW6MLWF









Reviews: