background image

Additional Information

1.   The SERVED counter on the display shows you how

many compartments have been opened per cycle. Once 
the counter reaches six (6), and all compartments have 
been served, the red LED light on the lid will begin 
flashing slowly, notifying you to remove the lid and refill the feeding compartments. 

2.  To refill the feeding compartments, turn the green knob above the display cover from the

locked (     ) position to the unlocked (     ) position and lift the lid straight up to separate it 
from the feeding tray. 

3.  Once the compartments have been refilled, replace the lid, return the green knob to the 

locked position, and press the START button to reset the SERVED counter to zero (0). 
Programming will resume normally.

4.  Always make sure the LCD display cover is securely fastened after programming to ensure 

that your pet(s) do not accidentally press buttons and/or change settings. 

5

Setting Meal Sizes

6.  For each meal, you can choose whether the feeder should open a

single compartment or multiple compartments. This is indicated by 

the word BOX on the right side of the LCD display screen. Use the 

up and down arrows to cycle between one (1), two (2), or three (3) 

compartments to be opened. Press ENTER to confirm. 

7.  Repeat steps 2-6 until you have programmed times and sizes for all

the meals you want to be scheduled. Press and hold the ENTER button 

until the device beeps twice to confirm and set your programmed 

meal settings. The names of the meals you have programmed will be 

displayed on the left side of the screen.

8.  To manually advance the feeder, press and hold the down arrow for

three seconds. The lid will rotate and open the next food compartment. 

NOTE: Each compartment holds approximately 1 cup (240 ml) of wet or dry food. If you choose more 

than one compartment to be opened, the feeder will open sections one after the other at an interval of 10 

minutes. For example, let’s say you set BREAKFAST at 6:15AM and choose BOX 2. The feeder will rotate and 

open the first compartment at 6:15AM. The compartment will stay open until 6:25AM, when it will rotate to 

open the second compartment. 

Please keep this in mind when filling and setting feeding times. If your pet eats dry food slower than wet 

food, in the above example, you would want to fill container one with wet food and container two with dry 

food, so he or she has a longer time to eat the dry food until the lid rotates at the designated LUNCH time. 

Compartment numbers are designated by raised numbers on the bottom of each compartment of the 

feeding tray.

Summary of Contents for PAW6MLWF









Reviews: