5 Configuration of the wibutler [specialist]
6
991398735-mub-en – V01
2017/01
5
Configuration of the wibutler [specialist]
1.
Set the Service Mode at the wibutler. The HeatBloC MC system is a wibutler
Professional Product and can only be registered and designed, if the Service Mode is
set. Please observe the separate instructions regarding the wibutler system.
2.
Open the wibutler app and create all rooms for the heating circuits.
3.
Start the teach-in process. Please observe the instructions in the wibutler app.
Teach-in process:
I.
Device management
> Add (+) > select
Manufacturer
PAW > select product
"HeatBloC MC" > start the teach-in process > follow the teach-in instructions in
the app
II.
Name the heating circuits and assign the heating circuits to the location of
installation, f. ex. "Heating" > the Device Management section "PAW" displays
all newly created heating circuits and the communication set
Assignment of heating circuits and rooms (design)
I.
Settings
>
Service section
>
Heating control
II.
Heat distribution
>
Add heating circuit
> name the heating circuit, f. ex. "1-ground
floor"
III.
> select the created heating circuit > configure the heating circuit (>)
IV.
> select
Control type
and confirm > assign the rooms
V.
> add
Control-/Regulation modules
> select the corresponding PAW heating
circuit and confirm > select the selected heating circuit > navigate to the tab
Options
> set the minimum and maximum temperatures
VI.
Check, if all rooms are assigned to this heating circuit.
VII.
Create and configure further heating circuits.
4.
Check the additionally assigned components such as room control unit and heat
generation.
5.
Assign the newly created heating circuits to the heating generator:
Heating generation
>
Heating generator
>
Heating circuits
>
Add
> select heating circuits
6.
Delete all messages, that appeared in the wibutler app during installation.
After commissioning the system works properly and these messages are out-of-date.
7.
Set the normal mode at the wibutler. Please observe the separate instructions
regarding the wibutler system.
8.
Familarize the main user with the installation.
