4 Assembly [specialist]
2017/01
991398735-mub-en – V01
5
4
Assembly [specialist]
WARNING
Risk to life and limb due to electric shock!
Prior to commencing electrical work on the controller, pull the mains
plug!
Only after completing all installation work as well as the flushing and
filling, the mains plug of the controller can be plugged into a socket.
An unintentional start of the motors is thus avoided.
1.
Mount the HeatBloC MC system and the communication set according to the
instructions.
2.
Open the PAW MCom app and start the hydraulic balancing of the radiators.
3.
Generate the commissioning certificate in the PAW MCom app.
4.
Shut down the communication set (see controller instructions).
5.
Disconnect the HeatBloC MC system and the communication set from the power supply.
6.
Connect the dongle to the USB extension of the communication set.
7.
Establish the power supply of the HeatBloC MC system and the communication set.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation in order to prevent material damage of the installation.