![background image](http://html.mh-extra.com/html/paw/solarbloc-maxi-basic-dn-25/solarbloc-maxi-basic-dn-25_installation-and-commissioning-instructions_764058007.webp)
3 Mounting and installation [specialist]
2020/09
9976x0210x-mub-en – V01
7
3
Mounting and installation [specialist]
Not included in the scope of delivery!
Accessories: compression fitting
1.
Push the union nut ② and the cutting ring ③ onto the
copper pipe ①. The pip
e must protrude at least 3 mm
from the cutting ring in order to ensure the force
transmission and the sealing.
2.
Insert the support sleeve ④ into the copper pipe.
3.
Insert the copper pipe with the plugged-on individual
parts (②, ③ and ④) as far as possible i
nto the body
of the compression fitting ⑤.
4.
First, screw the union nut ② manually.
5.
Tighten the union nut ② by rotating one full turn.
Secure the body of the compression fitting ⑤ against
distort in order to avoid damaging the sealing ring.
1.
Remove the station from the packaging.
2.
Remove the insulating front shell.