background image

 

 

User Instructions 

HEVC HD Decode System 

Model Name: 

DMD-10J

 

 

 

 

 

 

 

 

 

 

 

 

 

DOC-USR-0113-01 

Manual Version 2.03 

Software Version 2.03 

December 21, 2016 

 
 
 
 

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 

 

Copyright © 2016 Z3 Technology, LLC. All rights reserved.  

This document contains proprietary and confidential information of Z3 Technology, LLC ("Z3").  This document may not be used, reproduced, 

disclosed, or disseminated to anyone without the prior written approval of an authorized representative of Z3.

 

Z3 reserves the right to change this 

product at any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document 

are the property of their respective owners. 

 

 

Z3 Technology, LLC incorporates HDMI® technology.

 

The terms of HDMI and HDMI High-Definition Multimedia Interface, and 

the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Summary of Contents for DMD-10J





























Reviews: