en
60
When a function is selected, a sub-menu opens in which all adjustments required
can be made.
With this sub-menu, a relay and, if necessary, certain system components can be
allocated to the function.
The menu item Demand for the relay selection is available in all optional heating
functions. Therefore, it will not be explained in the individual function descriptions.
In this menu, a heating demand relay can be allocated to the function. All free relays
are available for selection.
In the sub-menu Controller, all free relays of the controller are displayed. If ex-
ternal modules are connected and registered, their relays will be displayed in cor-
responding sub-menus.
When a function has been selected and adjusted, it will appear in the Opt. func-
tions menu above the menu item Add new function....
This allows an easy overview of functions already activated.
An overview about which sensor has been allocated to which component and
which relay has been allocated to which function is given in the Status / Service
menu.
At the end of each optional function sub-menu, the menu items Function and
Delete function are available.
With the menu item Function, an optional function already selected can be tem-
porarily deactivated or re-activated respectively. All adjustments remain stored, the
allocated relays remain occupied and cannot be allocated to another function.
If the menu item Delete function is confi rmed by pressing button
➄
, a safety en-
quiry appears. The setting can be changed between Yes and No by pressing buttons
❷
and
❹
. If Yes has been selected and confi rmed by pressing button
➄
, the func-
tion is deleted and available under Add new function... again. The corresponding
relays are available again.
Summary of Contents for SC5.14
Page 78: ...en 78 ...
Page 79: ...en 79 ...
