![background image](http://html.mh-extra.com/html/paw/sc5-14/sc5-14_manual_764022066.webp)
en
66
Formatting the SD card
Î
Select the menu item Format card
The content of the card will be deleted and the card will be formatted with the
FAT fi le system.
Note:
To safely remove the SD card, always select the menu item Remove
card... before removing the card.
SD card
Adjustment
channel
Description
Adjustment range /
selection
Factory setting
Remove card...
Safely remove card
-
-
Save adjustments
Save adjustments
-
-
Load adjustments Load adjustments
-
-
Logging interval
Logging interval
00:01 … 20:00 (mm:ss) 01:00
Logging type
Logging type
Cyclic, Linear
Linear
Format card
Format card
-
-
14 Manual mode
Manual mode
Adjustment
channel
Description
Adjustment range /
selection
Factory
setting
Relay 1 … X
Operating mode selection
Max, Auto, Min, Off
Auto
All relays…
Operating mode of all relays
Auto, Off
Off
In the Manual mode menu, the operating mode of all relays in the controller and in
connected modules can be adjusted.
All relays are displayed in numerical order, fi rst those of the controller, then those
of the individual modules connected. Modules are listed in numerical order.
In the menu item All relays..., all relays can be switched off (Off) or set to auto-
matic mode (Auto) at once:
Off = Relay is switched off (manual mode)
Auto = Relay is in automatic mode
The operating mode can be selected for each individual relay, too. The following
options are available:
Off = Relay is switched off (manual mode)
Min = Relay is active at minimum speed (manual mode)
Max = Relay is active at 100 % (manual mode)
Auto = Relay is in automatic mode
Note:
After service and maintenance work, the relay mode must be set back to
Auto. Otherwise normal operation will not be possible.
Summary of Contents for SC5.14
Page 78: ...en 78 ...
Page 79: ...en 79 ...